CE Certified Porcelain Tiles: Specifications & Compliance Guide for Commercial Projects

CE Certified Porcelain Tiles: Specifications & Compliance Guide for Commercial Projects

Monalisa Group Co., Ltd. (“Monalisa”) is a high-tech listed company founded in 1992, headquartered in Foshan, China, that manufactures architectural ceramics including porcelain tiles. When specifying porcelain tiles for commercial or public projects in markets that require European conformity, CE certification is a fundamental compliance milestone. This guide details the CE‑certified porcelain tile models offered by Monalisa, their technical specifications, performance attributes, and the certifications that support their use in global building projects.

[IMAGE: https://cdn.socialarks.com/sbsp/24792/1/2026/0423/69e982122f743.png | Cover | Monalisa marble look porcelain tile 120x270cm – a CE certified model for wall and floor applications]

Why CE Certification Matters for Porcelain Tiles

CE marking is mandatory for construction products placed on the European Economic Area market. For porcelain tiles, the applicable harmonized standard is EN 14411:2016, which defines classification, characteristics, and performance verification. Tiles that carry the CE mark have been independently tested for dimensional accuracy, mechanical strength, slip resistance, thermal shock resistance, and chemical resistance. For project owners, architects, and contractors in Europe, North America, the Middle East, and other regions that recognize CE equivalency, specifying CE‑certified tiles simplifies regulatory acceptance and reduces project delays.

Monalisa’s CE‑Certified Porcelain Tile Models

Monalisa offers a range of porcelain tiles that hold CE certification. One representative product is the model 120‑270FEG12207M, a homogeneous body tile with a size of 1200×2700×12 mm, three phases, and a matt / natural stone face. It is produced from clay and quartz sand and is suitable for floors and walls in residential, commercial, public, municipal, industrial, hospitality, and agricultural settings. Another model, 8FMB10032PM, measures 800×800×10 mm with eight phases and a glazed‑polished surface finish, available in the Classic Stone type. Both models are CE certified.

[IMAGE: https://cdn.socialarks.com/sbsp/24792/1/2026/0428/69f0277fc9617.png | Supporting | CE test report page showing product description and certification number]

CE Certification Details

The CE certification for these porcelain tiles is issued by China Testing & Certification International Group Shaanxi Co., Ltd., under certification number CY25A10379‑TVOC. The certification applies to a glazed porcelain tile with work size 1200 mm × 1200 mm × 10 mm, classification B I a (glazed tile for wall and floor use, even surface). It confirms compliance with EN 14411:2016 and is valid for the Global market. This means that even for regions outside the EU, the CE mark is widely accepted as a benchmark for quality and safety.

Additional Certifications and Quality Standards

Beyond CE, Monalisa Group has obtained 15 certifications including ISO9001 (quality management) and ISO14001 (environmental management). The company has also been rated as a “Five‑star Standardization Good Practice Enterprise” and is recognized as a national “Resource‑saving and Environment‑friendly” pilot enterprise and one of the first batch of “Green Factories” designated by the Ministry of Industry and Information Technology. These credentials validate Monalisa’s commitment to consistent quality, environmental stewardship, and sustainable manufacturing.

The product also holds NSF certification (C0676949‑01) covering compliance with NSF/ANSI 51 for food equipment applications, which adds another layer of assurance for commercial kitchens and healthcare environments.

Step‑by‑Step Verification for Procurement

1. Confirm the CE certificate: Ask the manufacturer for a copy of the CE certificate (certificate number CY25A10379‑TVOC) and verify its validity via the issuing body, China Testing & Certification International Group Shaanxi Co., Ltd.
2. Match product specifications: Ensure the tile model (e.g., 120‑270FEG12207M or 8FMB10032PM) has the declared work size, surface finish, and classification (B I a) that match your project requirements.
3. Evaluate performance attributes: Use the CE documentation to check water absorption (≤0.5% for porcelain), abrasion resistance (PEI class), slip resistance (R‑value), and stain resistance (Grade 5).
4. Review sustainability credentials: Look for additional certifications like ISO14001, Green Factory status, and NSF to ensure compliance with green building standards such as LEED or BREEAM.

[IMAGE: https://cdn.socialarks.com/sbsp/24792/1/2026/0423/69e9b38182fed.jpg | Supporting | Scratch resistant porcelain tiles demonstration – part of the durability testing covered by CE]

Use Cases Across Applications

CE‑certified porcelain tiles from Monalisa are designed for diverse environments:

• Bathroom & Kitchen: The low water absorption and high stain resistance make them ideal for wet areas. Model 120‑270FEG12207M’s matt surface provides slip resistance (R10+).
• Outdoor terraces and pool surrounds: Frost resistance (tested to 100 freeze‑thaw cycles) ensures durability in cold climates.
• Commercial floors (shopping malls, airports): Abrasion resistance (PEI 4 or higher) handles heavy foot traffic. A case study from Jogyakarta Airport (80,000 m²) showed breakage rate below 0.3% and 30% lower life‑cycle maintenance costs.
• Industrial & healthcare: Antibacterial options (NSF certified) and easy‑clean surfaces meet hygiene requirements.

[IMAGE: https://cdn.socialarks.com/sbsp/24792/1/2026/0424/69eb0c34a586d.png | Proof | Unglazed porcelain tiles installed at Jogyakarta Airport – a large‑scale case demonstrating durability and performance]

Model Comparison

Frequently Asked Questions

Is this porcelain tile CE certified?

Yes. Both models 120‑270FEG12207M and 8FMB10032PM are CE certified. The CE certificate number CY25A10379‑TVOC was issued by China Testing & Certification International Group Shaanxi Co., Ltd., and confirms compliance with EN 14411:2016 for a glazed porcelain tile with work size 1200 mm × 1200 mm × 10 mm, classification B I a, suitable for wall and floor use. The certification is valid for the global market.

What are the key technical specifications of the CE certified models?

Model 120‑270FEG12207M is a homogeneous body tile measuring 1200×2700×12 mm with a matt natural stone face and three phases. Model 8FMB10032PM is a glazed‑polished tile measuring 800×800×10 mm with eight phases. Both are made from clay and quartz sand, have water absorption ≤0.5%, and achieve abrasion resistance suitable for commercial use. The 120‑270FEG12207M also meets R10+ slip resistance requirements.

What is the minimum order quantity (MOQ)?

Monalisa’s standard MOQ for porcelain tile OEM/ODM orders is 2,000 m². For standard stocked products, smaller quantities may be available; please confirm with the sales team.

What is the typical lead time?

For orders under standard production capacity, the lead time is 7–15 days. Large‑scale projects or custom designs may require scheduling; it is advisable to plan ahead and communicate exact requirements to the production team.

How can I obtain samples or request a quote?

Samples of the CE certified porcelain tiles can be arranged by contacting Monalisa’s sales team. For a free quote, detailed product specifications, or to request samples, please reach out via email at joanna_wang@fs-monalisatiles.com or WhatsApp at +86 18605191548. You may also download the company brochure for a complete product overview: Monalisa Porcelain Tile Brochure.

[IMAGE: https://cdn.socialarks.com/sbsp/24792/1/2026/0423/69e9b37164d76.jpg | CTA | Marble look porcelain tile – contact Monalisa for samples and project quotation]

Conclusion

CE certified porcelain tiles from Monalisa provide a reliable, compliant choice for commercial and residential projects across the globe. With clear certification documentation, multiple performance grades, and proven large‑scale installations such as the Jogyakarta Airport, Monalisa demonstrates its ability to meet both regulatory and real‑world demands. When evaluating suppliers for your next project, prioritize manufacturers with independently verified certifications and transparent technical data—Monalisa’s CE‑certified porcelain tiles are ready for specification.